PLANAR ARRAY CLUSTERING KITS

PLANAR ARRAY

The low profile FasPac array kits provide a wide variety of configurations for “FRI+” series loudspeaker cabinets. FasPac allows users the flexibility to create clusters up to 3 cabinets wide and up to two tiers high.

FasPac provides an easy and safe way to fly tightly packed loudspeakers in a planar array fashion then steer the array as one unit. In addition, FasPac offers precise splay angling between

cabinets to allow for the distance from the audience. Once clustered together, the array may be steered using the One-Way-Array® and tilted by way of the Steerables® Tilt Cable kit.

Array plates give designers the ability to create a variety of required configurations for each specific project. In addition, installers will save time assembling the loudspeakers together providing for a smooth predictable installation.

1. Steerables™ tilt cable kit (standard or custom)
2. Gridlink™ rigging beams
3. Add-on suspension eyebolt kit
4. Load rated hardware
5. Bridle and suspension cables (standard and custom)

TWO-WAY LINE ARRAY

THREE WAY LINE ARRAY

PART #: FP-FRI-1X3-B (W)
(1 WIDE X 3 DEEP LINE ARRAY KIT)
(2 FRI+122 OR 3 FRI+152)

TWO-WAY PLANAR ARRAY

PART #: FP-FRI-2X1-B (W)
(2 WIDE X 1 DEEP PLANAR ARRAY KIT)
(2 FRI+122 OR 2 FRI+152)

THREE WAY PLANAR ARRAY

PART #: FP-FRI-3X1-B (W)
( 3 WIDE X 1 DEEP PLANAR ARRAY KIT)
(3 FRI+122 OR 3 FRI+152)

THREE WAY PLANAR ARRAY

PART #: FP-FRIS1-3X1-B (W)
(3 WIDE X 1 DEEP PLANAR ARRAY KIT)
(2 FRI+122 AND 1 FRI-181S)

THREE-WAY PLANAR ARRAY

PART #: FP-FRIS2-3X1-B (W)
(3 WIDE X 1 DEEP PLANAR ARRAY KIT)
(2 FRI+152 AND 1 FRI-181S)

Warning: Mounting and/or suspension of loudspeakers requires experienced professionals. Improperly installed loudspeakers can result in property damage, personal injury and/or liability to the installing contractor.
Always use safety cables.

A division of: Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
PH: 562.424.1100 | FX: 562.424.3520